Brink Heat Recovery Systems
Brink Climate Systems are a Netherlands based company specialising in supplying centralised heat recovery ventilation systems. They are leaders in this technology for residential solutions and have a long history of innovation in design. Brink have a large and growing range of models which allow a very wide range of design and installation possibilities and we are proud to represent them here in New Zealand.
The systems can be installed utilising its sister company Ubbink manifold duct system or the more traditional ducted system utilising insulated duct with a series of leg and Y branches.
The manifold system is better suited to homes where the duct is installed inside the insulation envelope whereas the traditional ducted system is still the most economical where the system is installed outside the insulation envelope without having to accept any performance reduction.
Rennovent Excellent Series
A range of models form 300 to 450 cubic metres per hour are available for on the wall installations either in a cupboard, laundry, garage or purpose built plant room. The system may incorporate a variety of duct systems depending on access. The Brink Rennovent Excellent series offer:
- High efficiency counter-cross flow heat exchange
- Automatic summer bypass
- EC low wattage high efficiency motors
- Extraction boost
- A variety of entry vents including top and bottom
- Quiet operation
- Condensation drain so that wet areas are able to be included
- Electric element preheater for operation in very cold conditions
Rennovent Flair 325
Very new from Brink Climate Systems the "Flair 325" is the latest in the "Brink Stables" with a number of new innovations providing a new industry standard in efficiency.
The system has a maximum capacity of 325cmph and is far ahead of its time in performance, ease of installation and connectivity. A 400cmph model will be released soon.
SKY Series Models 150, 200 and 300
The SKY series, 150, 200 and 300 models can be installed in two different ways. Either an overhead horizontal position in a small cavity above the ceiling or in a vertical position at the back of a cupboard or the like. The Sky series is a relatively new product in the Brink range and is making a significant impact in offering viable alternative installation designs in the modern architecture in our new homes. This version of heat recovery is providing excellent solutions to homes where installation would otherwise not be possible.
- High efficiency counter-cross flow heat exchange
- Automatic summer bypass
- EC low wattage high efficiency motors
- Extraction boost
- A variety of entry vents including top and bottom
- Quiet operation
- Condensation drain so that wet areas are able to be included
- Electric element preheater for operation in very cold conditions
Sky150 & 200 Clip On Manifold
The SKY Clip on Manifold is a compact way of integrating the manifold with the heat recovery unit. The manifolds are neatly insulated which is necessary to maintain the efficiency of the heat recovery system but also doubles as a noise reduction "silencer". The unique side and reverse angle spigots helps to keep all duct connections to the manifold neat and tidy.
Sky300 with Clip On Manifold
Typical ceiling cavity void installation for the SKY units. You can see how well these have been designed to suit apartments and homes where ceiling cavity voids are minimal.
